Multi Boiler with a feeder type UKS-G - boiler power 43 kW
Nominal power: 43 kW
The size of the area to be heated: 250 - 310 m2
The UKS-G boilers are a new version of boilers with adjustable burning process, I was fired by hard coal and wood. Their construction was based on many years of experience acquired during the production of the well-known UKS-G boilers. The combustion process is similar here, i.e. from top to bottom. A feature and at the same time the advantage of these boilers is:
- easy handling, especially in cleaning,
- extends life
- smaller area occupied in the boiler room, at its greater height.
UKS-G boilers are designed for heating water to a temperature, at the outlet, not exceeding 90 ° C. They are mainly used in the installation of central heating in residential buildings, commercial pavilions, workshops, farms, greenhouses, schools, etc. UKS-G boilers can be installed only in open system installations, protected in accordance with PN-91 / B-02413 , they can work in a gravity or pump system. The research of this boiler was carried out by the Institute for Chemical Processing of Coal
Technical parameters of the boiler
Nominal power: 43 kW
Weight: 622 kg
The size of the area to be heated: 300 - 400 m2
Water capacity of the boiler: 162 l
Maximum water temperature: 90 °C
Minimum return and supply temperature: 60/70 °C
Maximum working pressure: 1.5 bar
Maximum test pressure: 4 bar
Thermal efficiency:> 82%
Required exhaust sequence: 0.25 - 0.35 mbar
Required chimney height: 8 m
Required chimney cross-section: 380 cm2
Diameter of the supply and return connector: G2 60 x 3.5
Flue pipe: FI 180
Power consumption: 230 V / 50 Hz - 90 W
Hydraulic resistance: 23 mbar
Controlling the UKS-G boiler - Proton
The PROTON regulator is a modern regulator for fine coal-fired boilers - as well as the successor of one of the most reliable regulators on the market - the YETI controller. Microprocessor controller PROTON is designed to control the blower and circulation pump in C.O. installations, has an output for connecting remote control.
Controlling the UKS-G boiler - Proton PID regulator - at an additional cost
The PROTON PID controller is a modernized version of the PROTON controller enriched with the PID algorithm, which makes it one of the most reliable and the most economical controllers on the market. The PROTON PID microprocessor controller is designed to control the blower and circulation pump in central heating installations, it has an output for connecting remote control, which further enhances its usability. The controller continuously and simultaneously controls the blower, and maintains the temperature set on the boiler at a constant level. This solution causes that there are no rapid temperature jumps in the boiler. The use of this regulator improves the ergonomics of use: no need to interfere in setting the controller in the event of a change in fuel (fuel).
Controlling the UKS-G boiler - Proton HU regulator - for an extra charge
The PROTON CWU regulator is a modern regulator for fine coal-fired boilers with the support of domestic hot utility water pump CWU. The PROTON CWU microprocessor controller is designed to control the blower, circulation pump, CWU pump in C.O. installations, has an output for connecting remote control.
In connection with continuous work related to improving the quality and technical parameters of our boilers, the manufacturer reserves the right to make changes to the current configuration, which may involve a change in dimensions and other data.